|Name:||Solar Plate Production Line||Turnkey Project:||Yes|
|Capacity:||Negotiable||Control:||PLC Touch Screen Control System|
paper faced gypsum board production line,
h beam production line
Solar Panel Production Line Turnkey Project
Technical Specifications of machines
1. Full automatic laminator
USE: As the equipment of manufacturing solar module limited to laminate glass, EVA (Ethylene Vinyl Acetate Sheet), solar cell and back sheet
Dimension: 14600mm x 2460mm x 1300mm
Must attention the size of laminator, make sure the entry of the building is enough
Laminating area:3600mm x 2200mm. Laminating height: 25mm
Total power consumption: 75 KW (AC380V, 60 Hz, or according to customer's nee)
Air source: 0.6 - 1.0 MPa.
Operating mode: Manual / Automatic.
Control system : PLC ( Delta). HIM system: Touch screen (Delta)
Heating mode: Oil Heating (SD320 hea t-conducting oil, capacity: 170 L, flow pressure:0.3 Mpa.), inculde: main heating and adjustable heating.
Temperature control: PID intelligent temperature contol system.
Temperature uniformity in working area: ≤ ±1.5 ºC
Temperature control accuracy:≤± 1 ºC.
Temperature control range: 30ºC - 180 ºC
Pumping rate: 70 L/s .Laminating time: 2 - 4 mins (Excluding solidification time)
Heating rate: 135ºC at room temperature with 50 to 60 minutes.
Vacuum rate: 200 L / S, the limit vacuum 70 ~ 90 Pa, vacuum Time: 90 seconds
Silicone sheet size: 3800mm * 2400mm, 5 mm thickness. It will be changed after 1500 times.
Lid opening: Straight from the hydraulic, the biggest opening height: 200 mm
Total weight: 15.8 T
Production capacity: Conventional 300 Wp (1800* 998) module, 3 pcs at the same time .
Production Capacity: 300 WP * 3 pieces/ time*3 time/h * 8hours * 300 days= 6.48 MWp/ year.
Warranty period: 1 year. (Exclusive easily damaged parts).
2. Solar cell tester
The solar cell tester machine to sort solar cells according to their electrical performance, tested under simulated sunlight.
Testing area: 200X200mm
Illumination uniformity: ±3%
Test period: < 3 second for each cell.
Working period: 24 hour
Measure the required electrical properties.
To be continued.....
For more details, please contact us. We can provide official proposal for you.
|NO.||Name||Operation area(for your reference)|
|1||Full automatic laminator||100m²|
|2||Solar cell tester||10m²|
|3||Solar module tester||6m²|
|5||Glass washing machine||13 m²|
|7||EVA, TPT cutting station||16m²|
|8||EVA, TPT transfer carrier||6m²|
|9||Solar cell soldering station||24m²|
|10||Soldering ribbon cutting machine||6m²|
|11||Cell string shelf||4m²|
|12||Ready material carrier||6m²|
|13||Module transfer carrier||6m²|
|14||Laying up station||10m²|
|16||Cell sorting table||6m²|
|17||Trimming working table||8m²|
|18||Cleaning working table||8m²|
|21||Laser dicing machine||6m²|