Design Capacity: | 10 - 80 Ton/Hour | Design Standard: | GB/T 18262-2000 |
---|---|---|---|
Control: | Siemens PLC | Turn-key Project: | Yes |
Condition: | Brand New | Drying Type: | Hot Air |
High Light: | industrial rotary dryer,kiln drying equipment |
Efficient Oriented Strand Board Single Pass Rotary Drum Dryer
Application
Wood particles, e.g., sawdust, mini chips, recycling material for PB and pellet production
Strands and wafers for OSB production
Disintegrated seasonal annual crops and other biomass for a wide range of applications
Description
Wet material is fed via a rotary valve and a specially designed infeed chute into rotating drum. There, the heat is transferred mainly through convection from the drying gases to the material for water evaporation. At the end of drum, the material is pneumatically transported to cyclones where the material is separated from the drying gases. One portion of the drying gases is recirculated to the mixing chamber of energy recovery and reduction of dryer exhaust volume.
Consumer benefits
High capacity
Internals designed according to material characteristics for high thermal efficiency and low moisture fluctuation
Optimized drum using FEM
High standard of ety and reliability
Low risk of fire and explosion
Design acc. to ATEX directive 2014/34/EU
Optimized cyclone design
3D modeling
Technical features
Fully integrated control of dryer and energy plant
Fully welded drum shell with alternating sections of cruciform internals and lifting blades
Gear box with frequency-controlled main motor and backup motor for emergency case
Minimal air leakage due to proven seal technology
Dryer exhaust gas recovery
Fully integrated dryer deluge system
No.
|
Model |
Design Capacity (Ton/Hour) |
Drum Diameter (Meter) |
Drum Length (Meter) |
1
|
SPD3524 | 14 | 3.5 | 24 |
2
|
SPD4026 | 20 | 4 | 26 |
3
|
SPD4526 | 25 | 4.5 | 26 |
4
|
SPD5026 | 30 | 5 | 26 |
5
|
SPD5628 | 40 | 5.6 | 28 |
6
|
SPD6030 | 50 | 6 | 30 |
If you are interested, do not hesitate to contact me.
REGARDS!